Cleaning: Our recommendation is cleaning product solid surfaces with warm water and mild soaps, such as those used for hands or dishes. Non-abrasive household cleaners such as Fantastik and Formula 409 may also be used. Cleaning products containing bleaching agents should not be used on solid surface. Make sure that the cleaning agent goes down the waste outlet and that it does not sit in the solid surface. Large quantities of these agents and extended periods of exposure may cause discoloration. Abrasive cleaners (such as Comet, Soft Scrub, Bon Ami, etc.) should not be used on solid surface except for removing tough stains, minor scratches and burns.
Care: Do not expose the surface to harsh chemicals, such as paint remover, turpentine, nail polish remover or stove cleansers. If these chemicals come in contact with the surface, immediately wash them off with water, using appropriate safety measures to avoid injury. Do not directly cut on the surface. This material is resistant to hear and is unlikely to mark below temperatures of 360 degree. This means, in practical terms, that pots in which water for example are boiled could leave on your solid surface for a limited (short) period of time without causing damage. We will offer sanding sponge together with your matte finished bathtub and basin. While minor cuts and scratches can be repaired by polishing slightly with the sanding sponge.